Lasso shock-absorbing support

In normal use, the support moves within the range of designed displacement, the cable does not play a limiting role, and the cable damping support is the same as the conventional support.

LRB highway bridge lead core seismic isolation rubber bearing

The highway bridge lead core seismic isolation rubber bearing is a standard bridge component product developed in accordance with national and industry-related standards, while also referencing European standards. This product is available in two types: rectangular and circular, suitable for various highway and municipal bridges in seismic zones of 8 degrees and below.

GKPZ(Ⅱ) Seismic Rubber Bearing

The GKPZ type bowl rubber support consists of an upper seat plate, a lower seat plate, a middle steel plate, a pressure-bearing rubber plate, a copper sealing ring, a rubber sealing ring, a polytetrafluoroethylene plate, an SF-1B composite plate, a stainless steel plate, a damping rubber ring, and a shock-absorbing plate. The supports are divided into 31 specifications based on vertical load capacity, ranging from 0.8MN to 60MN. Its structure is consistent with that of ordinary bowl rubber supports, with the addition of damping rubber rings and shock-absorbing plates, providing good seismic and shock-absorbing performance. The horizontal load capacity of the unidirectional movable support and fixed support is 20% of the vertical load capacity.

High Damping Rubber Bearing

High-damping rubber bearings consist of upper and lower connecting plates, upper and lower sealing plates, and a high-damping rubber matrix. The high-damping rubber matrix uses a combination structure of high-damping rubber and an intermediate steel plate, which is consistent with the structure of general rubber plate bearings. The connecting plates are used to connect with the beam body and the pier.

Lead core support

The lead core rubber bearing consists of upper and lower connecting plates, upper and lower sealing plates, a lead core, and a rubber matrix. The rubber matrix uses a vulcanized combination structure of rubber and an intermediate steel plate, which is consistent with the structure of a general rubber plate bearing, with the lead core evenly distributed in the middle of the bearing. The connecting plate is used to connect with the beam and pier.

Double spherical bearing isolation support

The double spherical bearing isolation spherical support consists of an upper plate, a lower plate, a double spherical body, a concave lining plate, a spherical wear-resistant plate, a flat wear-resistant plate, a polyurethane damping block, a shear-resistant ring, and so on. It has the characteristics of large displacement and large angle rotation, and the support is not limited by the temperature of the operating environment, making it widely applicable.